Tag Archives: Leaky Roof

Time to fix that roof leak

Leaking under the top deck

Thank goodness that I’ve been able to park the coach undercover for this job as there has been raining on and off. The Showgrounds have let us use one of the sheds for three weeks, thank you.

Nice to be under cover.

Now the fun begins

After trying to get the decking up and failing to do so, as I’d done a too good of a job gluing it down. Great! I had to come up with another solution.

Going over the top of the deck and sealing it instead, this way I can lay down some tiles to finish it off.

Now where is the leak???

Time to seal it up

For some reason the Sikaflex didn’t stick between the decking boards. So after scraping it all out I troweled in some bitumen putty to take its place. The next step was three coats of bitumen paint to go over the decking boards. After the bitumen paint had dried the next day I got the fire hose out and flooded the area for one hour with no water leaking any more.

Now the tile underlay goes down, after cutting it to size.  A box of nails later it’s all in place ready for the wet area under tile waterproofing.

The deck painted with bitumen waterproofing paint.
Tile underlay going down.
Floor nailed down.
Now time to start more waterproofing.

Next will be cutting the reinforcing bandage with bond-breaker for the edges. This will stop any damage to the waterproofing membrane if there is any movement.

Reinforcing bandage just to make it boom proof.
Now to start wet area tile waterproofing.

The under-tile waterproof membrane just paint on nice and easy thank goodness, so after going over the bandage and nail first. Then it was time for the first coat of three.

Joints and nail areas done.
Three coats should do I think.

Next blog will be about the tile set out and the gluing of them in place, with all the other fiddle bits to finish it off.

 

Why Stop at The Bedroom Ceiling

Lets just finish the ceiling prep

We started in the bedroom and that’s all we were going to do, but why stop there as it was a dirty job. So it was out with the scrapers again to remove the form underlay, only another 8 meters to go. I so much love working over my head.

So much fun I love my job.
This is after sanding all the contact glue off the ceiling
Halfway there.

Now to start on the new ceiling.

Well it’s now time to start on the new bedroom ceiling as It had to be finished so I could fix the roof above. Des had the sheetmetal already, so it was time to cut it up and start fitting it up in place.

The sheet metal that will be going up for the ceiling.
Time to cut it all to length.
This lot should do the bedroom through to the bathroom.

Now the fun beginnings of positioning them in place with Charmaine’s help and some timber I think we can do it. This will be done one sheet at a time as gluing them in place takes 24hrs, then the pop riveting and then we do it all over again with the next one.

The 1st sheet in place.
pop riveting done on the first sheet.
Onto the 2nd sheet.
Most of the bedroom ceiling done as well as the bit from the flat to the curve ceiling.

Now that we have done the ceiling in the bedroom, the rest will have to wait for another day and another blog.

Hatch Problems

Just a patch up job

This hatch will be used to get up on to the roof top deck later on, but till then I’ve had to fix the struts as the old ones were falling apart. We have been using the hatch for fresh air and light and the plastic struts just were not meant  to be used on a daily basis. I have had some gas struts for another job, so time for some modifications.

One stuffed hatch
Bathroom hatch has buggered struts
New fittings to the hatch for the gas struts.
Some new gas ones go on.
Fittings for the roof.
That will do me till this hatch turns into the way up to the roof top deck.

How to get up there

We will be looking at setting up a ladder later on after the bathroom is finish. There has to be some more work on the hatch as it will have to open up, so I’ll have to make some hinges to fit the roof profile as well as a latch system to keep it closed, fit some bigger gas struts to hold it up in place when it’s open.

From Old Air-Conditioning To Roof Top Deck

Everyone loves a nice deck

Why waste the space from the old air conditioning?  We have decided to turn it into our roof top deck. There was some eco decking on special at Bunnings so we couldn’t pass it up. We had to come up with some idea because when it rains it was filling up with water, not that it was leaking but the sound of it dripping when in bed made it sound like it was, so you would keep waking up looking for leaks. We only found this out when we were camping on the floor of the bus on our trip down the East coast to Brisbane.

The first job was to fill in under the fiberglass area where we cut out for the walk way and then seal it up.

Time for some sheetmetal work to start with.
The areas I have to fill in on either side of the walkway.
Marking it all out.
The cut.
Cut to size just need to bend it to shape.
Now let’s hope it fits in the hole.
The back side.
Well it fitting in nicely….. just.

Now for the decking

Apart from climbing up and down the ladder what felt like hundreds of times, this job was pretty straight forward. My legs and lower back are feeling it now. I had to first set out for the deck supports then pop revetting them in place, it was just a matter of cutting the decking to size, screwing and lastly gluing them into place. It was important to prevent any water getting under the decking so I sealed every joint with sikaflex. I also decided to use expanding foam under the deck for insulation.

Aluminium glue and pop riveted into place for the walk way to the deck.
The walkway from the hatch to the decking almost there.
Starting from the back screwing and gluing as we go.
The white silicon is where the pop rivets from the ceiling come through.
Halfway there.
Got to love the expanding foam, great insulation.
Well the decks down,
Looking from the back.
The back strips are in place.
Now the fiddly bits….. the air is sucked out from inside through this boxed off area.
Another job finished.

Job Done

The slates down the back are for the air flow and to let the water out when it rains. We will be putting the sola panels back up over the deck temporarily till the budget allows us to cover from the front of the coach to the back hatch. Now it’s time to get back inside and do some more work on the bedroom.

Old Air-Conditioning, Part 1, Part 2

The last bit to go on the coach old air conditioning

Will this ever end?

Well, it will I guess as we are almost there, it wont be long. All that is left is to clean up before water proofing the roof. I must say it has taken longer than I thought, but that seems to be what happens fitting out a coach into a motorhome. We had intermitted rain for some of this part of the water proofing section. Not only did I have to pump the excess water out of the roof area every time it rained, but then had to wait till it was fully dry before starting on it again.

I had run out of supplies a few times this week so it was handy that the hardware is nice a close. If we were still at Leigh Creek it would have been a 5 hour round trip to go pick up more things.

These are the only times I like being in the city.

Just the last bits of cutting things away before we finish doing the water proofing.
Now ready for water proofing.
Undercoating done.
1st coat of water proofing.
This is after the 3rd coat and I think this will be all.

Now that the water proofing has been done, we have decided a roof top deck would be a nice touch to the roof finish off. This will give us some more room, this one with a great views. We are not sure what type of chairs or table we want up on the deck. It will have to be fixed to the side some how, so we are leaving that for later on to do. I also am going to fix a wind turbine onto this area as well but again not sure how just yet. I guess all this will come to us over time. So this thankfully will the last blog on the old air-conitioning. 

Time To Fix The Motorhome Roof

Why Is It Wet In Here?

The only time it’s good to have a leaky roof is when their is nothing to get damaged inside. After a year thinking the roof was ok in Leigh Creek, we started having problems with the roof again. Mainly because where we moved to rained a bit more. To start off we thought it was only the fiberglass panels that were replaced from the old original bus windows that Des had fitted.

Thanks to Zac for his great help in getting the huge job started by cutting out the old Sikaflex. I was working six days a week @ Curtin Springs Station N.T., all I could manage was regluing after work. It did stop the water coming in around the fiberglass panels.

Fiberglass panels before we reglued then back in place.
Panels from inside

Its Still Wet In Here.

Our first house sitting job was in Bowen for Michael and Michelle. We had no rain forecast for the next few days so Charmaine and myself started on the roof to fix the rest of the leaks. The first job was to remove the solar panels and hatches from the roof.

Time to take the sola panels off
Removed the Solar panels now the hatches.
Time to start sanding back the roof.

The Fun Starts Now …….Not !!!

The fun of sanding back the old paint job as well as getting rid of the surface rust around the hatches. It was one of those jobs you love to hate, but had to be done, so with buckets of water and sanding paper in hand it was head down & ass up and off to work we go.

Rust all gone
Roof all sanded back and cleaned.

I Do Like Painting

Time to undercoat….. we had been so lucky as it had been raining all the way around us and only that a couple of rain drops on the coach. So after I Sikaflexed all the joints it was time to undercoat using  some Infrared Heat Reflective Primer.

1st undercoat.
Second undercoat, ended up with three coats
Infrared Heat Reflective Primer

Now for the topcoat, the best part of the job as it’s almost done. Des (the bloke we got the coach before us), had already paid for the paint, so now it was time for three topcoats.

Topcoat Solar Reflective Elastic Ceramic Membrane.
The roof finished with three topcoats
No more leaks on that area now.
A Job Well Done

So after four days we had finish painting the roof and the inside temp had gone down at least 4 degrees. The paint was a polyurethane membrane which meant no more water leaking when it rained and would be a lot cooler in summer. We just have to remove the old air conditioner unit which is now under the solar panels. This is way down the back of the coach once done the roof will be totally finished off, in time this back area will also have a deck for us one day.