Setting up for the black mirror area

But first I’ll have to run some 12v cables for the LED lights for the vanity as well as the laundry area so they can be switch on by them self. Than we will need 240v power for the front load washing machine under the bench, some were as well as a power point.

Power for the washing machine.

240v ran in the conduit and 12v for the vanity light.

More power bits. On this side will be the start of the kitchen.

12v power for the LED lights and a 240v power point.

I’m leaning the wall back at the top so I can see in the mirror.

First ply board in place.

That side is finish for now.

Clean up time

Now that is done it will be time to start cleaning up as I’ve made a mess, our house sit is getting close to ending and we will need time to organize the coach back into some kind of a place we can live in again. I’ve still have to put the sola panels back on and rewire then and a bit more to tidy up outside before we can start packing up.

More cupboard space

If one thing for shaw, this motorhome will have lots of storage space which puts a smile on Charmaine’s face. With this next cupboard there’s no smile on my face, it’s going to be a pain to fit into place as well as make. Good thing is no body can hear me cursing from inside the coach. First off I’ll just finish off the bathroom vanity side wall for some were for the overhead cupboard to be fitted too.

Now that I’ve worked out where it will be going I’ve screwed some scrap to the wall to hold the cupboard in place till it’s all screwed into place. It’s modification time let the fun begin.

Overhead cupboard needs some modification.

I think it’s coffee time now, maybe after I clean up a bit. Well that was not to bad after wall, I just like to bitch sometimes. So the next job will be the back wall behind the sink area as well as some sparky stuff.

From a coach to our motorhome and the bits between